Brocade FastIron Ethernet Switch Security Configuration Guide - Manual (Page 379)

The following sample output from the FastIron SX device shows the per-port display when the device
has "acl-per-port-per-vlan" configured for IPv4 and IPv6 on interface 121, which has ports 3/21 and
3/20.
NOTE
In FastIron SX devices, ACL accounting displays only the Byte counter field, and all other fields will
display “N/A”.
device#show access-list accounting ve 121 in
IPV4 ACL Accounting Information
perPort[3/20] => Inbound ACL: 10
0: permit host 10.10.10.1
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
-------------------------------------------------------------
65535: Implicit Rule deny any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
-------------------------------------------------------------
IPV6 ACL Accounting Information
perPort[3/20] => Inbound ACL: v6
0: permit ipv6 any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
-------------------------------------------------------------
1: permit ipv6 1000::/64 2000::/64
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
-------------------------------------------------------------
65533: Implicit ND_NA Rule: permit any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
--------------------------------------------------------------
65534: Implicit ND_NS Rule: permit any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
-------------------------------------------------------------
65535: Implicit Rule: deny any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
--------------------------------------------------------------
IPV4 ACL Accounting Information
perPort[3/21] => Inbound ACL: 10
0: permit host 10.10.10.1
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
--------------------------------------------------------------
65535: Implicit Rule deny any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 27452732
---------------------------------------------------------------
IPV6 ACL Accounting Information
perPort[3/21] => Inbound ACL: v6
0: permit ipv6 any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 1590514520
---------------------------------------------------------------
1: permit ipv6 1000::/64 2000::/64
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
---------------------------------------------------------------
65533: Implicit ND_NA Rule: permit any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
---------------------------------------------------------------
65534: Implicit ND_NS Rule: permit any any
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
---------------------------------------------------------------
65535: Implicit Rule: deny any any
Security Commands
FastIron Ethernet Switch Security Configuration Guide 379
53-1003088-03