Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 348)

The following figure shows an example of a Brocade device on which a Layer 2 port-based VLAN has
been configured.
FIGURE 72 Brocade device containing user-defined Layer 2 port-based VLAN
Configuring port-based VLANs
Port-based VLANs allow you to provide separate spanning tree protocol (STP) domains or broadcast
domains on a port-by-port basis.
This section describes how to perform the following tasks for port-based VLANs using the CLI:
• Create a VLAN
• Delete a VLAN
• Modify a VLAN
VLANs
348 FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04