Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 95)

show ip dhcp-server binding output descriptions (Continued) TABLE 12
Field Description
Client ID/Hardware address The hardware address for the client
Lease expiration The time when this lease will expire
Type The type of lease
Displaying address-pool information
This show ip dhcp-server address-pool command displays information about a specific address pool,
or for all address pools.
device# show ip dhcp-server address-pools
Showing all address pool(s):
Pool Name: one
Time elapsed since last save: 0d:0h:6m:52s
Total number of active leases: 2
Address Pool State: active
IP Address Exclusions: 192.168.1.45
IP Address Exclusions: 192.168.1.99 192.168.1.103
Pool Configured Options:
bootfile: example.bin
dhcp-default-router: 192.168.1.1
dns-server: 192.168.1.100
domain-name: example.com
lease: 0 0 30
netbios-name-server: 192.168.1.101
network: 192.168.1.0 255.255.255.0
next-bootstrap-server: 192.168.1.102
tftp-server: 192.168.1.103
Syntax: show ip dhcp-server address-pool [ s ] [name]
• address-pools - If you enter address-pools, the display will show all address pools
• name - Displays information about a specific address pool
show ip dhcp-server address pools output descriptions TABLE 13
Field Description
Pool name The name of the address pool
Time elapsed since last save The time that has elapsed since the last save.
Total number of active leases The number of leases that are currently active.
Address pool state The state of the address pool (active or inactive).
IP Address exclusions IP addresses that are not included in the address pool
Pool configured options
bootfile The name of the bootfile
Displaying address-pool information
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 95
53-1003087-04