Axis Communications Video Server 243Q Blade - Manual (Page 34)

34 AXIS 243Q Blade - Event configuration
The Include post-trigger buffer option contains images from the time immediately after
the trigger. Configure as for pre-trigger.
Note:
If the pre- or post-buffer is too large for the AXIS 243Q Blade's internal memory, the frame rate is reduced
and individual images may be missing. If this occurs, an entry will be created in the unit's log file.
The Continue image upload (unbuffered) option enables the upload of images for a fixed
length of time. Specify the length of time for the uploaded recording, in seconds, minutes
or hours, or for as long as the trigger is active. Finally, set the desired image frequency to
the maximum (the maximum possible) or to a specified frame rate. The frame rate will be
the best possible, but might not be as high as specified, especially if uploading via a slow
connection.
Scheduled event
A Scheduled event can be activated at pre-set times, in a repeating pattern on selected
weekdays.
How to set up a scheduled event
This example describes how to set the video server to send an email notification with saved
images from a set time:
1. Click Add scheduled... on the Event Types page.
2. Enter a descriptive name for the event, such as Scheduled email.
3. Set the priority (High, Normal or Low).
4. Set the Activation Time parameters (24h clock) when the event should be active,
for example, start on Sundays at 13.00 hours with a duration of 12 hours.
5. Set the When Activated... parameters which determines what the video server
should do at the specified time - for example, send uploaded images to an email
address.
6. Click OK to save the Event in the Event Types list.
Please see the online help for descriptions of each available option.