ASA Electronics Voyager AOM701 User Manual
Page 7
5. There are 2 options for connecting the LCD monitor to the connection cable. If the
application is such that the monitor is in close proximity to the connection cable,
the AOM701 monitor can be connected directly to the connection cable. If the
connection cable is mounted further from the monitor, use the 5’ intermediate cable
included with the AOM701 to connect the monitor to the connection cable. If more
cable length is needed, additional 5’ lengths of the intermediate cable can be
purchased. (See the accessory list at the back of this manual for part number
details.)
6. Connect the 4-pin power harness to vehicle. (See system connection illustration
page 8)
7. Plug camera extension cable (available separately) into AV1 or AV2 input connector
on the connection cable. Plug observation camera into camera extension cable.
8. Make sure all cables are routed away from hot or moving parts, and away from
sharp edges. Secure cables with wire ties.
9. For rear observation applications, range marker stickers have been included with
this product. These markers are designed to adhere to your LCD monitor and
provide a reference for gauging distance. See page 9 for illustration showing proper
use and installation of the range markers
7