Brocade Monitoring and Alerting Policy Suite Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 107)

Default Port Health monitoring thresholds for non-F_Ports (Continued) TABLE 31
Monitoring statistic
MAPS non-F_Port high/low thresholds and actions per policy
Aggressive Moderate Conservative Actions
Invalid Transmit Words
(ITW) 15/20 21/40 41/80 Low threshold: EMAIL, SNMP,
RASLOG
High threshold: EMAIL, SNMP,
FENCE, DECOM
Link Reset (LR) 2/4 5/10 11/20 Low threshold: EMAIL, SNMP,
RASLOG
High threshold: EMAIL, SNMP,
FENCE, DECOM
State Change
(STATE_CHG) 2/4 5/10 11/20 Low threshold: EMAIL, SNMP,
RASLOG
High threshold: EMAIL, SNMP,
FENCE, DECOM
Protocol Errors (PE) 0/2 3/7 5/10 Low threshold: EMAIL, SNMP,
RASLOG
High threshold: EMAIL, SNMP,
FENCE, DECOM
Loss of signal
(LOSS_SIGNAL) 0 3 5 EMAIL, SNMP, RASLOG
Link Failure (LF) 0 3 5 EMAIL, SNMP, RASLOG
Sync Loss
(LOSS_SYNC) 0 3 5 EMAIL, SNMP, RASLOG
RXP percentage 60 75 90 EMAIL, SNMP, RASLOG
TXP percentage 60 75 90 EMAIL, SNMP, RASLOG
Utilization percentage 60 75 90 EMAIL, SNMP, RASLOG
Resource monitoring thresholds
The following table lists the default monitoring thresholds for resource criteria used by MAPS. All
thresholds are measured per minute and are triggered when they are greater than the shown value.
Resource monitoring thresholds
Monitoring and Alerting Policy Suite Administrator's Guide 107
53-1003147-01