Brocade Virtual ADX Administration Guide (Supporting ADX v03.1.00) - Manual (Page 99)

Brocade Virtual ADX Administration Guide 87
53-1003249-01
Configuring RADIUS security
2
4. The RADIUS accounting server acknowledges the Accounting Start packet.
5. The RADIUS accounting server records information about the event.
6. When the event is concluded, the Brocade Virtual ADX sends an Accounting Stop packet to the
RADIUS accounting server.
7. The RADIUS accounting server acknowledges the Accounting Stop packet.
AAA operations for RADIUS
The following table lists the sequence of authentication, authorization and accounting operations
that take place when a user gains access to a Brocade Virtual ADX that has RADIUS security
configured.
TABLE 10 Action to access AAA operations for RADIUS
User action Applicable AAA operations
User attempts to gain access to the
Privileged EXEC and CONFIG levels of the
CLI Enable authentication:
aaa authentication enable default method-list
System accounting start:
aaa accounting system default start-stop method-list
User logs in using Telnet or SSH Login authentication:
aaa authentication login default method-list
EXEC accounting Start:
aaa accounting exec default start-stop method-list
System accounting Start:
aaa accounting system default start-stop method-list
User logs into the Web Management
Interface Web authentication:
aaa authentication web-server default method-list
User logs out of Telnet or SSH session Command authorization for logout command:
aaa authorization commands privilege-level default method-list
Command accounting:
aaa accounting commands privilege-level default start-stop
method-list
EXEC accounting stop:
aaa accounting exec default start-stop method-list
User enters system commands
(for example, reload, boot system) Command authorization:
aaa authorization commands privilege-level default method-list
Command accounting:
aaa accounting commands privilege-level default start-stop
method-list
System accounting stop:
aaa accounting system default start-stop method-list
User enters the command:
[no] aaa accounting system default
start-stop method-list Command authorization:
aaa authorization commands privilege-level default method-list
Command accounting:
aaa accounting commands privilege-level default start-stop
method-list
System accounting start:
aaa accounting system default start-stop method-list