Burcam 506721 CONVERTIBLE C.I. JET PUMP 3/4HP 115/230V User Manual
Burcam Pumps
READ THIS DOCUMENT IN TOTALITY PRIOR TO START
THE INSTALLATION.
WWW.BURCAM.COM
2190 Dagenais Blvd. West
TEL: 514.337.4415
LAVAL (QUEBEC)
FAX: 514.337.4029
CANADA
H7L 5X9 [email protected]
Your pump has been carefully packaged at the
factory to prevent damage during shipping.
However, occasional damage may occur due to
rough handling.
Carefully inspect your pump
for damages that could cause failures. Report any
damage to your carrier or your point of purchase.
Please read these instructions carefully.
Failure to comply to instructions
and
designed operation of this system, may void the warranty.
FACTORY SET VOLTAGE 115 V
CONNECTION VOLTAGE
CHANGING:
Before changing the
voltage connection:
A) Ensure the power to
the pump is disconnected.
B) Open motor junction box cover.
C) Please select the up knob
position for 115V or down
knob position for 230V.
D) Connect to appropriate voltage.
E) Close motor junction box.
INSTALLATION
INSTRUCTIONS
JET PUMPS
MODELS
506321/506721
(VERSION G 2015)
AND OTHER PRODUCTS
506327 506727
506328 506728
506331 506731
etc.
© 2015 BUR-CAM Printed in Canada 506343
1’’ Discharge connection
1 1/4’’ Suction connection