Aiwa NSX-TR77 - Manual (Page 17)

17
En
SOUND ADJUSTMENTS
Graphic equalizer
Selects a sound equalization curve to match the music type.
Press HEAVY, VOCAL, SALSA, TECHNO, HIP HOP
or MANUAL.
On the remote control, press GEQ and then press PRESET
M or N repeatedly within 4 seconds.
The selected equalization curve is displayed.
•MANUAL is a customized curve (see "Setting a curve
manually").
To cancel equalization
Press the selected button on the unit again. "GEQ OFF" is
displayed.
On the remote control, press GEQ and then press PRESET
M or N repeatedly within 4 seconds until "GEQ OFF"
is displayed.
Setting a curve manually
The equalization curve can be customized to suit your
preference.
1 Adjust the three frequency ranges.
- To adjust the low frequencies (BAS), turn TRIPLE
DRIVE. Adjust from MIN (-2) to MAX (+5).
- To adjust the middle frequencies (MID), hold down
ENTER and turn TREBLE/MIDDLE. Adjust from MIN
(-5) to MAX (+5).
- To adjust the high frequencies (TRE), turn TREBLE/
MIDDLE. Adjust from MIN (-5) to MAX (+5).
On the remote control, press SOUND repeatedly to select
the frequency range (BAS, MID or TRE), and then press
M or N within 6 seconds to adjust the level.
If you want to store your customized curve, proceed to
the next step.
2 Hold down MANUAL (GEQ on the remote
control) until "PRESET" flashes in the display
and then press ENTER within 4 seconds.
The customized curve is stored in "MANUAL"
•If you select one of the preset curves such as HEAVY before
step 1, you can customize a curve on it.