Ameriphone VCO - Manual (Page 9)

Using Your Dialogue VCO
(Continued)
Hold
To put the line on hold, press the
HOLD
button and return the handset
to its cradle. In telephone mode, the
screen shows “CALL-ON HOLD &
MUTE”. In text mode, it shows and
transmits the message “PLS HOLD…”.
Note:
If you pick up an extension
phone on the same line when the
Dialogue VCO is on HOLD, the
Dialogue VCO will disconnect and
you can continue your conversation
on the extension phone. If you do not
pick up the phone at another exten-
sion in 3 minutes, the phone will dis-
connect.
Last Number Redial
To redial the last number dialed with
the Dialogue VCO phone, lift the
handset and press REDIAL. The
phone will redial up to 31 digits.
Flash
Press the FLASH button as displayed
in Figure 14 to access the special
services available from your local
phone company such as Call Waiting
and 3-Way Calling.
P
E
0 #
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
*
Figure 12 - Hold Button
O
P
E
0 #
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
*
7
Figure 13 - Redial Button
O
P
E
0 #
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
*
Figure 14 - Flash Button