Condec MPV-10K User Manual
Mp v -1 0k, Micro-metering p recision v alv e
© CONDEC 2001 • All rights reserved • Printed in the United States of America • Specifications subject to change without notice
March 2001
Toll Free: 888-295-8475 • International: 715-234-9171 • FAX: 715-234-6967
WEB SITE: www.4condec.com
MP
V
-1
0K
Micro-Metering
P
recision
V
alv
e
MPV-10K Micro-Metering Precision Valve
Patent No. 4.698.998
Part #57168: MPV-10K with Fluorocarbon “Viton” (standard)
Part #54803: MPV-10K with Nitrile Buna-N O-ring
Part #54906: MPV-10K with Ethylene-propylene
Part #57161: MPV-10K with Silicone
Part #57122: MPV-10K with Neoprene
SPECIAL FEATURES:
• MPV-10K features all stainless steel construction for use with corrosive gases and on
operating pressure from vacuum to 10,000 psi. It consists of one low torque, fine micro-
metering valve with positive shut-off, adjustable stop and soft seat. The valve allows the
operator a very fine fingertip pressure adjustment.
• Selecting the appropriate O-ring material may extend the wide range of gas applications.
OPERATION:
The pressure valve will begin to open when it is turned counter clockwise approximately
15 degrees. Full open position of the valves is achieved with a maximum of 3 1/2 turns
from the closed position. The valve has a fine adjustment sensitivity of .0005 psi. Very low
torque is required to turn the vernier... FINGERTIP ADJUSTMENT!!!!!
SPECIFICATIONS:
•
Pressure Range: 0-10,000 psi and vacuum
•
Proof Pressure: 15000 psi
•
Orifice: .032
•
CV: .007
•
Mechanical Rotation: 10 turns (nom.)
•
Torque: Fingertip adjust
•
Volume: 1/2 cubic inch (Nom.)
•
Adjustable sensitivity: .0005 psi
•
Construction: 303 stainless steel body, black anodized aluminum knob. All other parts 304 series stainless,
O-rings fluorocarbon “Viton” STD, others available.
•
Weight: 3.0 lbs.
•
O-ring repair kits: Buna-N (part #58499); Ethylene-Propylene (part #58506);
Silicone (part #58509); Neoprene (part #58515); Fluorocarbon “Viton” (standard) (part #55277).
Note: Various O-ring materials may be installed in MPV-10K by special order, but may not be
rated for 10,000 psi
67742