24 chapter 5: software support, Select the replacement drive then press <enter – Asus K8V SE User Manual

Page 130

Advertising
background image

5-24

Chapter 5: Software support

FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.

[ Select Drive for Rebuild ]

[ View Array Definition Menu ]

Array No RAID Mode Total Drv

Status

Array 1

Mirror/Stripe

4

Critical

Stripe Block:

Not Available

Gigabyte Boundary:

ON

Channel: ID

Drive Model

Capacity (MB)

3:Mas FUJITSU MPD3043AT

4325

[ Keys Available ]

[ ] Up [ ] Down [ESC] Exit [Enter] Select

[ ] Up [ ] Down [ESC] Exit [Enter] Select

7. Select the replacement drive then press <Enter>.

FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.

[ Keys Available ]

[ ] Up [ ] Down [ESC] Exit [Enter] Select

[ ] Up [ ] Down [ESC] Exit [Enter] Select

[ Rebuild Array Menu ]

Array No RAID Mode Total Drv Capacity Status

Array 1 Mirror/Stripe 4 7999 Critical

Array 2 ----- ----- ----- -----
Array 3 ----- ----- ----- -----
Array 4 ----- ----- ----- -----

8. Confirm the command to copy data from the intact source hard disk

into a new replacement hard disk. A progress bar displays the copy
progress for the duration of the task.

9. When completed, the utility prompts you to reboot the system. Press

any key to reboot your system.

Controller Configuration (6): This command shows the default for
Controller Configuration. The default value is [Enabled].

Advertising
This manual is related to the following products: