Macrovision notice, Safety instructions – AVERATEC 7100 User Manual
Page 7
VII
Preface
Macrovision Notice
This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights.
Use of this copyright
protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized
by Macrovision.
Reverse engineering or disassembly is prohibited.
Safety Instructions
1.
Read the safety instructions carefully and thoroughly.
2.
Save this User Guide for possible use later.
3.
Keep this equipment away from humidity and high temperature.
4.
Lay this equipment on a stable surface before setting it up.
5.
The openings on the enclosure are used for air convection and to prevent
the equipment from overheating.
Do not cover the openings.
6.
Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 100~240V before connecting the
equipment to the power inlet.
7.
Place the power cord in a way that people are unlikely to step on it.
Do
not place anything on the power cord.
8.
Always unplug the power cord before inserting any add-on card or module.
9.
All cautions and warnings on the equipment should be noted.
10. If any of the following situations arises, get the equipment checked by a
service personnel: