Elitegroup A960M-MV (V1.0A) - Manual (Page 49)

Once the steps above have been completed, please
connect the peripherals such as the keyboard,
mouse, monitor, etc. Then, connect the power and
turn on the system. Please install all the required
soŌware.
Step 8: ConnecƟng ports on the case:
Please install all peripheral devices.
8-1. Keyboard connecƟon
To prevent component damage, do not power up the system unƟl the
installaƟon is complete.
8-2. Printer connecƟon
8-3. Monitor connecƟon 8-4. Speaker connecƟon
8-5. Power connecƟon 8-6. Mouse connecƟon
The sequence of installaƟon may diīer depending on the type of case and
devices used.
BIOS NavŝŐĂƟon Keys

Scrolls through the items on a menu
Using BIOS
The BIOS (Basic Input and Output System) Setup UƟlity displays the system’s
conĮguraƟon status and provides you opƟons to set system parameters. When
you power on the system, BIOS enters the Power-On Self Test (POST) rouƟnes,
please press <DEL> or F2 to enter setup . When powering on for the Įrst Ɵme, the
POST screen may show a “CMOS ^ĞƫŶŐƐ Wrong” message. Please enter BIOS and
choose “Load Default Seƫngs” to reset the default CMOS values. (Changes to
system hardware such as diīerent CPU, memories, etc. may also trigger this
message.)
KEY
+/-

ModiĮes the selected Įeld’s values
F2 Previous Value
F3 OpƟminjed Defaults
F1 General Help
ESC Exits the current menu
Enter Select
F4 Save & Exit
KEY FUNCTION
English
45