Elitegroup AG400T8-D64 (V1.0) - Manual (Page 9)

Chapter 2:Hardware Installation
5
Chapter 2
Hardware Installation
To install this AG400T8-D64 VGA card, please follow the
instructions.
Package Contents
Your card package should contain the following items:
♦ This User’s Manual
♦ The VGA card
♦ All necessary software discs.
Unpacking
♦
The card contains sensitive electric components, which can be
easily damaged by static electricity, so the card should be left
in its original packing until it is installed.
♦
Unpacking and installation should be done on a grounded
anti-static mat. The operator should be wearing an anti-static
wristband, grounded at the same point as the anti-static mat.
♦
Inspect the card carton for obvious damage. Shipping and
handling may cause damage to your card. Be sure there are no
shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF THE
CARD HAS BEEN DAMANGE.