Elitegroup H61H-G11 (V1.0) - Manual (Page 34)

30
Using BIOS
EUP Support (Enabled)
This item allows user to enable or disable EUP support.
f f f f f Power Management Setup
This page sets up some parameters for system power management operation.
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use
this item to do wake-up action if inserting the PCI card.
Resume By USB 1.x2.0 (S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
Power Management Setup
Resume By PME [Disabled]
Resume By USB 1.x/2.0 (S3) [Disabled]
EUP Function [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
About Resume by PME
Press <Esc> to return to the Advanced Menu page.
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit