Elitegroup A907 (VD) - Manual (Page 88)

76
To check the power cables, and connections:
1. If you have been using battery power, connect the DeskNote to an external power source and
make sure that the battery has a charge.
2. If you are using the DeskNote with the AC adapter, check the power outlet, the power cord,
and any power switches that may affect your computer.
•
Check the wall outlet or power strip with an item that you know is functioning properly.
A lamp or radio is a convenient item for checking the power. You may also need to check
the fuses and breakers in your electric box.
•
If the outlet is controlled by a wall switch, make sure that the switch is on.
•
If the outlet is controlled by a dimmer switch, use a different outlet.
• If your computer is plugged into a power strip with an On/Off switch, make sure the
switch is on.
3. With the computer’s power switched off, check all cable connections. If the computer is
connected to any peripheral devices, look for loose or disconnected cables. If the computer is
too close to a wall, a cable connection may be loose or the cables may be crimped.
Do not substitute cables for different devices (other than the
manufacturer recommended cables) even if they look exactly alike.
The wiring inside the cable may be different.
4. When you are certain that you have power available and all connections are good, turn the
computer on again. If the computer still does not start, you may have a hardware problem.