Elitegroup G733G User Manual
Page 12
outlet to avoid being damaged by transient overvoltage.
11.
12.
13.
14.
15.
16.
17.
18.
Never pour any liquid into the opening, this could cause fire or electrical shock.
Never open the equipment. For safety reason, the equipment should only be opened by a
qualified service personnel.
If on the following situations arises, get the equipment checked by a service personnel:
The Power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you cannot get it work according to the user's manual.
The equipment has dropped and damaged.
If the equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned, storage temperature above 60
°C
(140
°f), it may damage the equipment.
The unit can be operated at an ambient temperature of max. 35
°C.
The sound pressure level at the operators position according to IEC 704-1: 1982 is equal or less
than 70 dB(A).
Power Cord Requirements
The power cord set used with the AC adaptor must meet the requirements of the country where
you use the AC adaptor, whether it is 100-120 or 200-240 Vac. The following information
explains the requirements for power cord set selection.
•
The cord set must be approved for the country in which it is used.
•
The appliance coupler must have a configuration for mating with a
CEE22/EN6032/IEC 320 appliance inlet.
For U.S. and Canada:
•
The cord set must be UL Listed and CSA Certified.
•
The minimum specifications for the flexible cord are No. 18 AWG.
For Japan:
•
All components of the cord set must bear a “PSE” or “ T ” mark and registration
number in accordance with the Japanese Dentori Law.
•
The minimum specifications for the flexible cord are .75m ㎡ conductors.
For Other Countries:
•
The cord set fittings must bear the certification mark of the agency responsible for
evaluation in a specific country.
•
The flexible cord must be of a HAR (harmonized) type H03VV-F.
•
The cord set must have a current capacity of a least 2.5 Amperes and voltage rating of
125 or 250 Vac.
When using your telephone equipment, basic safety precautions should always be followed to
2