Elitegroup G733 - Manual (Page 70)

Remove the compartment cover and then angling it up and out.
If you need to install a higher capacity module, gently push the edge clips on both sides to
release the module. Angle the card slightly upward and gently slide it from its edge connector
slot. Store the card in the anti-static bag that contains your new module(s).
To install the new memory card, hold the card with its gold edge connector toward the edge
connector slot of the compartment. To help you orient the cards, the edge connector has been
made with two unequal-length sections. You will only be able to insert the card in one direction.
62