Elitegroup A980 User Manual
Page 66
54
Ø
The settings are Auto, Disabled, 3F8W/COM1, 2F8h/COM2, 3E8h/COM3,
2E8h/COM4
IR Mode Select
This option specifies the infrared transmission method.
Ø
The settings are SIR (default value)
OnBoard Parallel Port
This option specifies the base I/O port address of the parallel port on the motherboard.
Ø
The settings are auto (default value), Disabled, 378h/278h/3Bch.
Parallel Port Mode
This field allows you to set the communication mode of the Parallel Port.
Ø
The settings are SPP, EPP, ECP or EPP+ECP (default value)
Parallel Port IRQ
This field display the parallel port IRQ set in your system.
Parallel Port DMA
This field display the parallel port DMA channel set in your system.
OnBoard PCI IDE
This field is used to configure the IDE HDD installed in the system. To configure, move the
PgUp key to select the setting.