Elitegroup A929 (V2.0) - Manual (Page 67)

Driver Mode
This define the two status of Single , Mirror and Multi Monitor (when an
external monitor is connected to your DeskNote computer).
When the "Single" is selected, the display can only be seen
on the DeskNote LCD panel or external monitor.
When the "Mirror" is selected, you can toggle between the
LCD and CRT display. Both the LCD and CRT screen
display the same image.
Display Combination
This applies to the display that you prefer to use. The options are VGA1
and LCD2.
REMINDER: The "Auto" tab will serve as additional function of the
"Mirror" and "VGA1" respectively by removing the check mark under
the "Display Combination" selection field.
Select the "VGA1" if you want the picture to only display on
the monitor screen.
Select "LCD2" if you want the picture to only display on the
DeskNote screen.
NOTE: Use the [Fn] + [F12] hot keys to toggle between the LCD
and external monitor display.
If you prefer to use only one display in operating your system,
press the [Fn] + [F12] hot keys will shut down the LCD
display, external monitor display or both at this random order.
Option 1: Single
This function will only show one single display whether it be on your
Desknote or external monitor.
55