Asus Motherboard A8V-XE - Manual (Page 71)

ASUS A8V-XE 2-29
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When
this item is set to Enabled, the items Date (of Month) and Resume Time
(hh:mm:ss) become configurable with set values.
Configuration options: [Disabled] [Enabled]
Restore on AC Power Loss [Power On]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more
than 4 seconds. Configuration options: [Suspend] [Instant-Off]
2.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. Select an item then press <Enter> to
display the configuration options.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to set.
Hardware Monitor
Vcore Voltage [ 1.64V ]
3.3V Voltage [ 3.24V]
5V Voltage [ 5.21V]
12V Voltage [ 11.71V]
CPU Temperature 57ºC
M/B Temperature 35ºC
CPU Fan speed 4265 RPM
Chassis Fan speed 0 RPM
Phoenix-Award BIOS CMOS Setup Utility
Power