Elitegroup 259EI - Manual (Page 40)

■ chapter 2 bios setup and security feature
2-8
Note:
If you select Realtek Boot Agent, the system will attempt to boot from the
network.
Note: When the BIOS performs POST, you may also press F12 Key to enable the
Boot Device selection menu. You may choose CD/DVD, Hard Drive, or Realtek Boot
Agent as the first storage device to boot from. If you have already connected a USB
Floppy Disk Drive before powering up, it will appear as a Removable Device in the
Boot Device selection menu
Exit Setup
Item Selections /
Sub-menu Description
Saves
Changes and
Exit N/A After you have completed the BIOS
settings, select this item to save all
settings, exit BIOS Setup utility, and
reboot. New system settings will take
effect on next power-up. F10 key can be
used for this operation.
Discard
Changes and
Exit N/A Discards changes done so far to any of
the setup questions and exit.
Discard
Changes N/A Discards changes done so far to any of
the setup questions.
Load Optimal
Defaults N/A Load Optimal Default value for all the
setup questions. F9 key can be used for
this operation.