Elitegroup 258KA v.4 - Manual (Page 7)

■ chapter 4 upgrading your computer
4-7
Installing a memory module (DIMM) into the system
To install the DIMM, do the following:
1. Power OFF the notebook. Unplug the AC cord and all
cables/devices attached to the notebook.
2. Place your hand on a large metal object momentarily to
discharge any static electricity. Place the notebook on a flat
surface and fully open the LCD lid.
3. Locate and remove 11 Screw A’s on the Metal Cover.
4. Remove the Metal Cover. The DIMM socket is now seen
as shown below.