Elitegroup X40IIx User Manual
Page 74
Advertising
■ chapter 4 upgrading your computer
4-14
angle of approximately 30 degrees into the empty memory
socket. Then press it firmly so that the contact edge is driven
into the receiving socket.
7.
Pivot the DIMM until the latches on both sides of the
socket snap into place.
Note:
Notice the notch on the DIMM. The notches should fit nicely with the
socket.
8.
Put the Metal Cover back. Put the keyboard back to its
original position. Make sure the edge of the keyboard now
resides under the spring-loaded latches.
Advertising