Precautions for handling dvd-rom/combo discs, Power saving modes, The battery power system – Elitegroup 600 User Manual

Page 35: Removing the battery pack

Advertising
background image

The Audio Play feature allows you to play music CDs

Front panel load/unload button

Supports CD-DA, DVD-ROM mode 1 and mode 2, Multi-Session
Photo CD™, CD-I/Video CD (pcs.)

Low power consumption

12.7mm height

Precautions for Handling DVD-ROM/Combo Discs

Always hold the disc by the edges, avoid touching the surface.

Use a clean, dry, cloth to remove dust, smudges, or fingerprints.
Wipe from the center outward.

Do not write or place objects on the surface of the disc.

Store discs in a cool dry place not to damage the disc.

Do not use benzene, thinners, or cleaners with detergent. Only use
DVD-ROM cleaning kits.

Do not bend or drop the discs.

Power Saving Modes

This section contains information on the Notebook’s power system,
including the AC Adapter, the battery system, recharging the battery, and
tips for conserving battery power.
The power system is comprised of two parts, the AC Adapter and the
battery system. The AC Adapter converts AC power from a wall outlet to
the DC power required by the computer.

The Battery Power System

A fully charged pack will provide approximately 2 hours of battery life
depending on your system configuration application it runs. Before using
the computer on battery power for the first time, check the battery status
icon on the Windows Toolbar to make sure the battery is fully charged.
See Battery Status later in this section for a description and explanation of
the Windows Battery icon.
Charging the battery takes about 4 hours to charge when the system is in
off state. If possible, always charge the battery completely.

Removing the Battery Pack

To remove the battery pack from its compartment, please refer to Chapter
Three, Inserting and Removing the Battery Pack.

27

Advertising
This manual is related to the following products: