AT&T TL74458 - Manual (Page 61)

56
Answering system setup
Number of rings
You can set the answering system to answer an
incoming call after two, four, or six rings. You
can also select toll saver, which is explained
below. Unless you change it, the answering
system answers an incoming call after four rings.
To set the number of rings:
1. Press
SETUP. The system will announce
"Number of rings," followed by the current
setting, and then "To change the setting,
press
SKIP or REPEAT; to continue setup,
press SETUP."
2. Press SKIP or REPEAT to change to two,
four, or six rings, or toll saver.
• Toll saver - the answering system answers
a call after two rings when there are new
messages, and after four rings when there
are no new messages. This allows you to
check for new messages without paying
for a toll call.
3. Press SETUP to save your selection and move
to the next menu option.
-OR-
Press
PLAY/
STOP to save your selection
and exit the menu.
Answering system operation