Elitegroup V10IL1 - Manual (Page 9)

4
„ The minimum specifications for the flexible cord are
No. 18 AWG, (2) Type SPT-2, and (3) 2-conductor.
B. For Japan:
„ All components of the cord set must bear a “PSE”
mark and in accordance with the Japanese Dentori
Law.
„ The minimum specifications for the flexible cord
are .75m ㎡ conductors, (2) VCTF or VCTFK, and (3)
2-conductor.
„ The cord set must have minimum rated current
capacity of 7 A.
„ The attachment plug must be a two-pole, grounded
type with a Japanese Industrial Standard C8303 (15
A, 125 VAC) configuration.
C. For Other Countries:
„ The cord set fittings must bear the certification mark
of the agency responsible for evaluation in a specific
country.
„ The flexible cord must be of a HAR (harmonized)
type H03VVH2-F.
„ The cord set must have a current capacity of a least
2.5 Amperes and voltage rating of 125 or 250 Vac.
CAUTION: MODEL V10ILx(x=0~9) IS DESIGNED TO USE WITH
THE FLLOWING AC ADAPTER MODEL ONLY
Manufacturer: DVE
Model: DSA-30PFA-19 US 190158 (30W)
Manufacturer: Li Shin International Enterprise Corp.
Model: 0225C2040 (40W)
Manufacturer: Delta Electronics, Inc.
Model: ADP-40MH AD (40W)
Manufacturer: Delta Electronics, Inc.
Model: ADP-40PH AB
Manufacturer: Lite-On
Model: PA-1400-11
18. When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons. These precautions
includes the following: