Elitegroup G10IL2 - Manual (Page 10)

4
„ The minimum specifications for the flexible cord are
No. 18 AWG, (2) Type SPT-2, and (3) 2-conductor.
B. For Japan:
„ All components of the cord set must bear a “PSE”
mark and in accordance with the Japanese Dentori
Law.
„ The minimum specifications for the flexible cord
are .75m ㎡ conductors, (2) Type VCTR or VCTFK,
and (3) 2-conductor.
„ The cord set must have minimum rated current
capacity of 7 A.
„ The attachment plug must be a two-pole, grounded
type with a Japanese Industrial Standard C8303 (15
A, 125 VAC) configuration.
C. For Other Countries:
„ The cord set fittings must bear the certification mark
of the agency responsible for evaluation in a specific
country.
„ The flexible cord must be of a HAR (harmonized)
type H03VVH2-F.
„ The cord set must have a current capacity of a least
2.5 Amperes and voltage rating of 125 or 250 Vac.
CAUTION: MODEL G10IL2(x=0~9) IS DESIGNED TO USE
WITH THE FLLOWING AC ADAPTER MODEL ONLY
Manufacture: Li Shin International Enterprise Corp.
Model: 0225C2040 (40W)
Manufacture: Delta Electronics, Inc.
Model: ADP-40MH AD (40W)
18. When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons. These precautions
includes the following:
¾ Do not use this product near water, for example, near a
bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
¾ Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.
¾ Do not use the telephone to report a gas leak in the
vicinity of the leak.