Elitegroup L51AI v.4 - Manual (Page 11)

■ chapter 4 upgrading your computer
To install the DIMM under the keyboard, do the following:
1. Remove Screw D.
2. Find the keyboard latches near the edges of the
keyboard. The latch is spring-loaded. It will retract when
pressed and revert back to its original position when released.
Use a small blade to press the latch inward. The keyboard tray
should pop up slightly over the latch. If the keyboard tray does
not pop up, try to gently lift it up slightly above the latch. Repeat
this step for the other keyboard latches.
4-11