Elitegroup EZ-Buddie2 D21 I4-3 Install v.1 User Manual

Page 5

Advertising
background image

5

Euro

87.5 MHz --- 108.0 MHz

87.5 MHz

0.1MHz

USA

87.5 MHz --- 108.0 MHz

87.5 MHz

0.1MHz

China

88.1 MHz --- 107.9 MHz

88.1 MHz

0.2MHz

Japan

76.0 MHz --- 108.0 MHz

76.0 MHz

0.1MHz

c. When you power on the system, the FM Module will be ready (5V Standby). Make sure the signal cable and

power cord are connected to the speakers, otherwise the speakers will make no sound.

The FM Radio default channels are as above mentioned factory default.

The FM Radio signal output level is set to 5.

d. When this system is connected to the power source and not booted up yet, pushing the Clock/ Radio Switch

button will not switch the system to show you the clock-time, but instead can turn off the volume.

After booting up the system, pressing the Clock/ Radio Switch button will display the clock time based on the

RTC (Real Time Clock) of the mainboard.

The clock time can be adjusted from BIOS and the operating system.

e. FM Volume control button can adjust only the FM Radio signal output level (1-10); The actual sound volume

can be adjusted using the Main Volume knob and the one on the speaker.

f. You can setup six FM radio memory channels using the remote controller. The detail of the setup can be found

in the section about the remote controller.

7 EZ Cinema Start

Button

Pushing this button can start using the EZ-Cinema feature.

When there is no Windows installed, pushing this button can activate the EZ-Cinema.

When there is a copy of Windows ME, 2000, or XP installed, you need to open the

[Power option properties] dialog and activate the Hibernate option. This will then

allow you using this button to switch to the EZ-Cinema mode, otherwise the system

will refuse to switch. Windows98 does not support this button.

8 Main Volume Control

Knob

Turn clockwise to increase the volume, counterclockwise to decrease.

9

Media key

In the EZ-Cinema mode, you can use this key to choose from the Enabled media

source, which in sequence are CDROM, CF, SD, MS, and SM.

10 Play / Pause

In the EZ-Cinema mode, pushing this button will start playing, and again to pause.

11 Stop

In the EZ-Cinema mode, pushing this button will stop playing.

12 Next

In the EZ-Cinema mode, pushing this button will jump to next track.

13 Previous

In the EZ-Cinema mode, pushing this button will return to previous track.

Advertising