Elitegroup MS200 (V1.0) - Manual (Page 29)

22
Using BIOS
Enable Clock to All PCI/PCIE (Disabled)
This item displays the information of current manufacturer of the CPU installed in
your computer.
Ratio Actual Value: 12
This item shows the actual ratio of the CPU installed in your system.
CPU Frequency Setting (533MHz)
This item is used to set the CPU Frequency.
CPU Spread Spectrum (Disabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Mag-
netic Interference) generated by the system.
BIOS Security Features
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
BIOS Security Features
Help Item
: Move F10: Save ESC: Exit +/-/: Value Enter : Select
F9: Optimized Defaults
F1:General Help mnlk
F7: Previous Values F8: Fail-Safe Defaults
Press <Esc> to return to the main menu setting page.
Supervisor Password : Installed
User Password : Installed
Change Supervisor Password Press Enter
Change User Password Press Enter
Security Check Setup
Install or change the
password
Supervisor Password (Installed)
This item indicates whether a supervisor password has been set. If the password has
beeninstalled, Installed displays. If not, Not Installed displays.
User Password (Installed)
This item indicates whether a user password has been set. If the password has been
installed,Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
submenu to change the supervisor password.