Elitegroup CDC-I (V1.0) - Manual (Page 34)

30
Using BIOS
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Scroll to this item and press <Enter> to view the following screen:
fSmart Fan Function
CPU Smart Fan Control (Enabled)
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
PC Health Status
Smart Fan Function
CPU Fan Speed : 1319 RPM
System Temperature 36 O C
System Fan Speed : 0 RPM
CPU Voltage 1.176 V
DIMM Voltage
: 1.504 V
-=- PECI Mode -=-
Offset to TCC Activation Temp. : -57
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
This item allows you to enable/disable the control of the CPU fan speed by changing
the fan voltage.
Smart Fan Mode (Normal)
This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be auto
adjusted depending on the CPU temperature. If you choose Quiet mode, the fan speed
will be auto minimized for quiet environment. If you choose Silent mode, the fan
speed will be auto restricted to make system more quietly. If you choose Manual
mode, the fan speed will be adjust depending on users’ parameters.
CPU Smart Fan Control Enabled
Smart Fan Mode Normal
High Limit Offset (-) : 65
Low Limit Offset (-) : 45
High Limit PWM : 255
Low Limit PWM : 76
High Limit Offset (-) : 65
Low Limit Offset (-) : 45
High Limit PWM: 255
Low Limit PWM: 76
Smart Fan Mode Normal
System Smart Fan Control Enabled
Main Advanced Chipset Tweak Boot Security Exit
Main Advanced Chipset Tweak Boot Security Exit