Fig. 1 fig. 2 – Hired-Hand RollSeal Sidewall System (Curtain): Floating Hook & Loop Assembly User Manual
Page 2
HIRED-HAND, INC. • 1733 Co Rd 68 • Bremen, AL 35033 • Phone 256-287-1000 • Fax 256-287-2000
Manual Part No. 4801-5105 Rev 6-02
5. Insert the floating hook & loop plate into your trak.
(See Fig. 1).
6. Mark the screw hole positions of the hook & loop
plate on the trak. (See Fig. 1)
7. Remove floating hook & loop plate from trak.
8. At points marked on trak, drill holes through trak for
bolts & nuts.
9. Insert the floating hook & loop panel into the trak.
Make sure that the panel exactly matches the height of
the trak. (See Fig. 2).
10. Insert the hook & loop plate over the panel. (Fig. 2)
11. Install bolts through the plate, panel, and trak to fasten
the hook & loop strip to the trak. (Fig. 2)
12. Tighten bolts and nuts securely.
13. Installation complete.
Fig. 1
Fig. 2
Trak
Plate
Panel
Trak
Plate
Install bolts and nuts
to fasten panel and
plate to trak.
Bolt