Hired-Hand Circulation and Stir Fans: MEGA-FLOW 24 INCH ORIFICE STIR FANS User Manual

Mega-flow 24 inch orifice stir fans, Agricultural heating & ventilation systems, Description

Advertising
background image

HIRED-HAND, INC.

1733 County Road 68 • Bremen, AL 35033 USA • Phone 256-287-1000 • Fax 256-287-2000

Manual Part No. 4801-0176 rev 9-08 Page

1 of 2

MEGA-FLOW 24 INCH

ORIFICE STIR FANS

WARNING!

1. Only qualified electrician personnel familiar with the

construction and operation of this equipment and the
hazards involved should install and/or service this
equipment. It is important that all standard electrical
codes be observed when wiring the fan. Read and
understand all instructions and diagrams before
proceeding. Failure to observe this precaution could
result in equipment damage, severe bodily injury, or
loss of life.

2. Disconnect power source before installing or servicing

fan. Failure to disconnect power source can result in
property damage, serious injury, or death.

3. When connected to an automatic controller, FAN MAY

START AT ANY TIME.

4. IMPORTANT! Before Operating Fan, Inspect Fan For

any Object That May Obstruct Blade Rotation.

5. When this fan is used in a life support ventilation system

where failure could result in loss or injury, the user
should provide adequate backup ventilation or accept
the risk of such loss or injury.
















DESCRIPTION

Installation and wiring of the Hired Hand Mega-Flow
24” Orifice Stir Fan is quick and simple. Figure 1
shows the 24 inch Stir Fan. Figure 2 shows a Stir Fan
typical installation. Figure 3 shows how the Stir Fan
must be mounted to allow proper operation.














Part #

Description

Model

6603-4400

Mega-Flow 24 inch
Orifice Stir Fan

MF-24O-D-S-SE-.33V-24*S-

0-0-0-0-A

MAINTENANCE

Read WARNING statements before proceeding.

Blades, motor, and wire guards should be cleaned
periodically to decrease vibration and ensure maximum fan
life. Remove dirt with a dry brush or compressed air. DO
NOT SPRAY MOTOR WITH WATER OR CLEANING
FLUIDS.

Fan performance may be greatly reduced by damaged or
dirty shutters (if applicable). Clean and inspect shutter
periodically to ensure maximum fan performance.

BEFORE INSTALLATION

Inspect fan for damage in transit. Check for loose, missing,
or damaged parts.

If there are any missing parts or if there is any shipping
damage, do not attempt to operate fan. Contact your
Distributor.

WARRANTY

Your fan has been manufactured with the finest materials and
components available, and is backed by a one year warranty
against electrical and mechanical defects in material and
workmanship. If this fan fails to operate during this period,
return it prepaid to the place of purchase for repair or
replacement without charge at the manufacture’s option.
Damage by accident or abuse is not covered by this warranty.
This warranty gives you specific legal rights and you may have
other rights that vary from state to state.

Figure 2:

24 inch Stir Fans

Installed

Figure 1:

24 inch Stir Fan

AGRICULTURAL HEATING

& VENTILATION SYSTEMS

Total Systems, Total Control

Advertising