Hired-Hand Circulation and Stir Fans: Funnel Flow Fan User Manual

Funnel flow fan, Stir fans, Replacement parts

Advertising
background image

Hired-Hand, Inc.

• 1733 County Road 68 • Bremen, Alabama 35033 • PH 256-287-1000 • FAX 256-287-2000

Manual Part No. 4801-2992 Rev 11-05





























































REPLACEMENT PARTS

Part. No. Description
3017-5018

Motor 1/3 HP 1075 RPM

6403-0121

SS FF 24" PROP 3 BLADE

6403-5013

/PROP GS EF-24

WARRANTY

INSTALLATION

MAINTENANCE

INSTALLATION

1. Disconnect power source before installing or

servicing fan. Failure to disconnect power
source can result in property damage,
serious injury, or death.

2. When connected to an automatic controller,

FAN MAY START AT ANY TIME.

3. IMPORTANT! Before Operating Fan, Inspect

Fan For any Object That May Obstruct Blade
Rotation.

1.

Read WARNING statements before proceeding.

2.

Blades, motor, and wire guards should be
cleaned periodically to decrease vibration and
ensure maximum fan life. Remove dirt with a
dry brush or compressed air. DO NOT SPRAY
MOTOR WITH WATER OR CLEANING FLUIDS.

3.

Fan performance may be greatly reduced by
damaged or dirty shutter. Clean and inspect
shutter periodically to ensure maximum fan
performance.

Your Funnel Flow fan has been manufactured with the finest
materials and components available and is backed by a one year
warranty against electrical and mechanical defects in material
and workmanship. If this fan fails to operate during this period,
return it prepaid to place of purchase for repair or replacement
without charge at the manufacturer's option.
Damage by accident or abuse is not covered by this warranty.
This warranty gives you specific legal rights and you may have
other rights that vary from state to state.

INSTALLATION

1. Attach fan by flange to wall.

2
. Fan is provided with wire guards for your

protection. National safety codes require that
guards be installed if fan is installed within 7 feet
of floor or in reach of personnel or livestock.

FAILURE TO GUARD MOVING PARTS MAY

RESULT IN SERIOUS INJURY OR DEATH.


3. Connect Power Cord and Electrical Power

4. Unit is now ready for operation.

IMPORTANT: INSPECT FAN FOR ANY OBJECT
THAT MAY OBSTRUCT BLADE ROTATION
.

Part. No. Description

Funnel Flow Fan

MAINTENENCE

1. Inspect fan for damage in transit.

Check for loose, missing, or damaged

parts.

2. Do not operate fan until you are completely

familiar with its operation.

READ ALL INSTRUCTIONS PRIOR TO INSTALLATION

Stir Fans

Advertising