Hired-Hand Evolution 4000 Control System - Manual (Page 9)

Part No. 4801-5338 Rev 01-10 Evolution 4000 9 of 86
5.1 Navigator Panel
The Navigator buttons are used to select a controller function. Press up or down button to toggle between
functions. LED (light emitting diode) lights when a function is selected and the associated data is
displayed in the Main Display.
5.1.1 Select System View
The Select System View SELECT button is used to toggle between the Main, Auxiliary, or Back-Up
controller system views. LED (light emitting diode) lights when a function is selected and the associated
data is displayed in the Main Display. Scroll through seven of the MAIN System View Navigator sections
by using the Select UP and DOWN arrows. The Auxiliary System is used to monitor a separate room
which is typically an egg/cooler room in certain applications. The Auxiliary System View has three
Navigator sections (Current Conditions, Historical Data, & Alarm Status). The Back-Up System View has
the one Current Conditions Navigator section which is a quick link to show the back-up system status
information concerning back-up operation (Targets, limits, alarm status and other information detailed in
Section 6.11).
Function Modes
Up Select Button
Down Select
Button
Light Emitting
Diode Indicator
System Modes System Select
Button
System Modes
System Select
Button
Up Select Button
Down Select
Button
Light Emitting
Diode Indicator
Light Emitting
Diode Indicator