Hired-Hand Emergency Back-Up and Alarms: High Temperature Monitor Installation - Manual

High Temperature Monitor Installation
HIRED-HAND, INC. • 1733 Co Rd 68 • Bremen, AL 35033 • Phone 256-287-1000 • Fax 256-287-2000
Manual Part No. 4801-5152 rev 8-03 Page 1 of 4
FIGURE 1
High Temperature Monitor
FIGURE 1
DESCRIPTION
The Hired-Hand High Temperature Monitor provides high
temperature alarm capability for locations such as control
rooms, breaker boxes, etc.
The control setting knob can be set to OFF, 37°C/100°F,
48°C/120°F, or 60°C/140°F. If the control setting knob is set to
one of the temperatures, the customer provided alarm will be
activated when the selected temperature is reached. If the
control setting knob is set to OFF, the alarm will not be
activated.
DANGER
HAZARDOUS VOLTAGES
Failure To Follow These Instructions May Result in Injury
Or Death!
• Do Not Place The Temperature Probe Inside A
Breaker Box Without First Removing Power From
The Breaker Box.
• DO NOT Connect The Alarm Wires To An Electrical
Outlet Or Power Source.
• Only A Certified Electrician Should Install Or
Remove The Temperature Probe From A Breaker
Box.
• Ensure All Cables And Wiring Are Placed And
Secured Before Turning Power ON.
Product Number
Part Number Model
6407-1701 EV High Temperature Monitor
NOTE
The temperature monitor will not reset until the
temperature around the temperature probe drops
10°F (5.5°C) below the set temperature.
The EV High Temperature Monitor is shipped pre-assembled
and ready for installation and wire connections.
The High Temperature Monitor is supplied with a 10 foot
temperature probe cable assembly and a 5 foot alarm cable.
When the monitor is received, check for shipping damage.
LIMITED WARRANTY
All products are warranted to be free from defects in material and workmanship for a period of one (1) year, from the date of purchase if installed and used in strict accordance with the installation
instructions. Liability is limited to the sale price of any products proved to be defective or, at manufacturer's option, to the replacement of such products upon their return. No products are to be
returned to the manufacturer, until there is an inspection and/or a return goods authorization (RGA) number is issued. All complaints should be directed first to the authorized distributor who sold
the product. If satisfaction is not obtained or the name of the distributor is not known, write the manufacturer that appears below, directed to the attention of Customer Service Manager. This
limited warranty is expressly in lieu of any and all representations and warranties expressed or implied, including any implied warranty or merchantability or fitness for a particular purpose. The
remedy set forth in this limited warranty shall be the exclusive remedy available to any person. No person has authority to bind the manufacturer to any representation or warranty other than this
limited warranty. The manufacturer shall not be liable for any consequential damages resulting from the use of our products or caused by any defect, failure or malfunction of our products. (Some
areas do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you). This warranty gives you specific legal rights and
you may also have other rights that vary from area to area.
Alarm Wires
Temperature
Settings
Temperature
Probe
Mounting
Holes
!