Hired-Hand Evolution Series Bird Scale: Platform & Load Cell Assembly - Manual

Bird Scale Platform & Load Cell Assembly
for EV Bird Scale
HIRED-HAND MFG., INC. • 1733 County Rd 68 • Bremen, Alabama 35033 · Phone 256-287-1000 • Fax 256-287-2000
Manual Part No. 4802-5117 rev 7-08 Page 1 of 1
P/N: 1004-1217
Eye Bolt 3/8 x 2.5”
P/N: 1012-1467
Quick Link 1/4
P/N: 6607-8044
EV Load Cell Module
P/N: 0401-10462
Bird Scale Pole - Middle
P/N: 0401-10383
Bird Scale Pole - Bottom
P/N: 1001-1457
Lock Nut 3/8-16
P/N: 0403-10379
SS Bird Scale Platform
P/N: 0401-10381
Expansion Sleeves
P/N: 0401-10381
Expansion Sleeves
P/N: 1048-7000
Wire Lock Pin ¼ x 2”
P/N: 1048-7000
Wire Lock Pin ¼ x 2”
Upper Assembly Notes:
Assemble these items loosely
first as shown then insert into
the end of the Bird Scale Pole-
Top.
While holding the Open Eye
Bolt, tighten the finishing nut
securely using a 9/16” open-
end wrench while the
Expansion Sleeves are
completely inside the Pole-Top.
P/N: 1002-6400
Open Eye Bolt 3/8 x 7”
P/N: 1001-1456
Finishing Nut 3/8-16
P/N: 1001-1457
Lock Nut 3/8-16
P/N: 0401-10384
Bird Scale Pole - Top
Two 9/16” Open-End Wrenches
P/N: 1002-6401 Hex Bolt 3/8 x 3.5”
P/N: 1001-1457 Lock Nut 3/8-16
LOWER ASSEMBLY
UPPER ASSEMBLY
Lower Assembly Notes:
Assemble these items loosely
first as shown then insert into
the end of the Bird Scale Pole -
Bottom.
While holding the Hex Bolt with
a 9/16” open-end wrench,
tighten the locking nut securely
using a second 9/16” open-end
wrench. The Expansion
Sleeves must be completely
inside the Pole-Bottom.
NOTE: The Eye Bolt supplied with
this kit is for wood attachment only.
Eye Bolt for metal attachment is
NOT INCLUDED.
4 inches
3/4
inches
NOTE: The Minimum Overall Height is 6’ 6”.
The Maximum Overall Height is 9’ 6”.
P/N: 0403-10802
3” Washer
P/N: 0403-10802 3” Washer