Kushlan Products Industrial Portable Tripod Mixer - Manual (Page 11)

KU S H LA N
P R O D U C T S , LLC
10
Operation
1. Position the mixer on a level surface. (NOTE: Maximum slope is 5° (degrees). Before lling the drum, make sure
the mixer can empty into a wheel barrow).
2. Use a 3 prong, grounded, 110v/120v power connection. Although the minimum gauges are listed below, we recommend that
a 14 gauge (AWG) wire be used for al lengths.
Cord Length
(Total Feet)
AWS
(Wire gauge)
Volts
Ampere Rating 0 - 6
120
18 16 16 14
25 50 100 150
3. While the drum is rotating add water, concrete and aggregate. Secure the stability bolt prior to drum rotation.
4. To pour the concrete, elevate the dump handle while the drum is rotating.
5. In the event of overheating and your motor shuts down, turn o the On/O switch and unplug the unit for 15 minutes. After
the cooling period, plug in the unit and press the Manual Reset Thermal Protector button, then turn the On/O switch to on.
When tilting the drum to pour the concrete , do so in a very slow, smooth manner. This keeps the mixer balanced and upright.
C A U T I O N
C A U T I O N
Maintenance and Cleaning
DISCONNECT THE POWER CORD.
1. Clean thoroughly after each use. Remove all concrete from the mixer.
2. Lightly grease all moving parts.
3. Keep the motor cooling ns clean and free of build up.
4. When cleaning the mixer, wipe the On/O switch assembly and motor with a damp cloth. Do not spray water directly
onto this area. Protect motor and switch assembly from rain.