Lincoln Electric IM348 AC-225-GLM - Manual

LINCOLN
ELECTRIC
®
AC-225-GLM
WELDING POWER SOURCE
by
IM347
April, 1998
Contents
Page
Safety Precautions ...............................................................................................2
Installation and Operating Instructions
for AC-225-GLM Dual Voltage Type (K1327)............................................7
Includes safety, installation, operating instructions
and parts lists.
Learning to Weld .................................................................................................9
Using the Carbon Arc Torch..............................................................................17
Includes for heating metal, welding aluminum or
brazing with an arc torch.
Selecting Electrodes ..........................................................................................19
Welding Books and Teaching Aids ...................................................................23
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS MAN-
UAL AND THE SAFETY PRE-
CAUTIONS CONTAINED
THROUGHOUT.
And, most
importantly, think before you act
and be careful.
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
World's Leader in Welding and Cutting Products Premier Manufacturer of Industrial Motors
RETURN TO MAIN MENU