Lincoln Electric IM544 Commander 400 - Manual (Page 36)

F-4 DIAGRAMS F-4
COMMANDER 400
CONNECTION DIAGRAM:
LN-23P
KIT
ADAPTER
K350-1
6 PIN
ELECTRODE CABLE
AMPHENOL
AMPHENOL N.B. USE VOLTMETER SWITCH TO SELECT DESIRED ELECTRODE POLARITY.
TO WORK
12-13-96
COMMANDER 400 STICK & WIRE / LN-23P CONNECTION DIAGRAM
N.C. IF REMOTE OUTPUT CONTROL IS USED, PLACE LOCAL/REMOTE SWITCH IN "REMOTE" POSITION.
WIRE FEEDER
N.A. WELDING CABLE MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE AND FUTURE APPLICATIONS. SEE OPERATING MANUAL.
14 PIN
S22911
N.D. ON COMMANDER 400 STICK & WIRE, THE OUTPUT CONTROL SWITCH MUST BE IN THE "WELDING TERMINALS REMOTELY CONTROLLED" POSITION.
ELECTRODE
TO WORK
Keep guards in place. or service this equipment. Keep away from moving parts. Only qualified personnel should install,use
Do not touch electrically live parts. before servicing. Disconnect NEGATIVE (-) BATTERY LEAD Do not operate with panels open.
WARNING