Lincoln Electric IM722 Demo Zone K1854-2 and K1854-3 - Manual (Page 12)

B-1 OPERATION B-1
GENERAL DESCRIPTION
DEMO ZONE
The Demo Zone is a compact system to display and
demonstrate welding and cutting equipment.
The Demo Zone contains:
- Square Wave TIG 175 Power Source
- Power MIG 255 Power Source
- Ranger 250 Power Source (K1854-2)
- ZR-10 Power Source (K1854-3)
- V350 Pro Power Source
- Pro Cut 55 Plasma Cutter
- LN-25 Wire Feeder
- LN-7GMA Wire Feeder
- Holder for 4 gas cylinders
- Welding table
- Power distribution system with circuit breaker protec-
tion
- Welding cables and torches
- Tool box for storage of tools, welding accessories
and welding plates
- Illuminated lower area by neon and florescent lamps
- Prominent promotional sign
- Caster wheels allow easy movement.
All equipment on the Demo Zone is connected and
ready to weld. The Demo Zone obtains its power from
a 230V 40A receptacle.
RECOMMENDED PROCESSES AND
EQUIPMENT
RECOMMENDED PROCESSES
The Demo Zone is capable of demonstrating MIG,
TIG, SMAW, CAC and plasma cutting.
PROCESS LIMITATIONS
– determined by individual equipment
DEMO ZONE
ELECTRIC SHOCK
can kill.
• Do not touch electrically live parts or
electrode with skin or wet clothing.
• Insulate yourself from work and ground.
• Always wear dry insulating gloves.
• Read and follow “Electric Shock Warnings”
in the Safety section if welding must be
performed under electrically hazardous
conditions such as welding in wet areas or
on or in the workpiece.
FUMES AND GASES
can be dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust to
remove fumes from breathing
zone.
WELDING SPARKS
can cause fire or
explosion
• Keep flammable material away.
• Do not weld on containers that
have held combustibles.
ARC RAYS
can burn.
• Wear eye, ear and body
protection.
SAFETY PRECAUTIONS
Read and understand this entire section before oper-
ating the machine.
Observe additional Safety Guidelines detailed in
the beginning of this manual.
WARNING