ARCHOS AV 700 - Manual (Page 6)

11
11
2 2
INTRO – First Time Usage INTRO – First Time Usage
2.1 Plugging in the AC Adapter 2.1 Plugging in the AC Adapter
• Use only the included ARCHOS ™ charger/adapter.
• You can charge the internal battery of the AV 700 by plugging the included adapter/charger directly into the
device, or you can charge it by plugging the adapter/charger into the TV Docking Pod and connecting your
AV 700 to the Docking Pod.
• Before using for the fi rst time, charge the batteries completely. The charge indicator (CHG) light just below the
navigation pad will start to blink when the battery is charged.
2.2 Turning on the AV 700 2.2 Turning on the AV 700
• Hold the PLAY/ON button for 3 seconds. The green “On” indicator light will turn on. Be patient, it will take a
few seconds for the operating system to boot up.
• If the unit shuts off after holding the ON button for several seconds, plug in the ARCHOS ™ adapter/charger to
make sure the batteries get charged.
2.3 Shutting off the AV 700 and Battery saving features 2.3 Shutting off the AV 700 and Battery saving features
To shut off the unit, press and hold the STOP/ESC/OFF button for 3 seconds.
In the Power menu [Display setup screen Power: Battery Operation] there is a Power Off parameter. It is
factory set to 6 minutes. Thus, if your AV 700 is idle for 6 minutes, it will shut itself off. This setting can be changed
from one to nine minutes or to never .
In the Power menu [Display setup screen Power: Battery Operation] there is a
Backlight Off parameter to save battery power (the lighting of the screen consumes
a lot of the battery power). It is factory set to 60 seconds. That is, if the AV 700 is not
being used, the screen will shut off in order to save battery life. To turn the screen back
on, just click once on any button. See the section Power in the Settings chapter for a
complete explanation.
12
12
2.4 Changing the Interface Language 2.4 Changing the Interface Language
The AV 700 interface can be set to English (default), French, Spanish,
German, or Russian.
• Using the UP action button, highlight the Settings icon (showing a
wrench) and then click the center SELECT action button.
• Highlight the Display icon and click the PLAY/ENTER button.
• Highlight the Language parameter using the UP/DOWN buttons.
• Click the RIGHT or LEFT button to choose the desired language.
• The language displayed will change immediately.
• Click on the STOP/ESC button to return to the Setup page and again to return to the main menu screen.
2.5 Foreign Character Sets 2.5 Foreign Character Sets
You have the possibility to display your fi le names, folder names, and music tags in various character sets
(ex: Korean, Japanese, Simplifi ed Chinese, etc.). You can fi nd the language fi les CodePage_name.4FZ in the
font folder under /Data/Asian Fonts on the AV 700 hard drive or on the ARCHOS
™ website under the heading
Software. If, for example, you would like to have the Korean language display, then you would copy the fi le
CP949.4FZ into the folder
/system on the AV 700 and shut down and restart the AV 700. File names, folder
names, and music tags written using the Microsoft ® codepage for the language will now be displayed in that
character set. Only one .4FZ can be used at a time, thus you should only put one .4FZ fi le into the /system folder.
When an .4FZ language fi le is used, the interface language will be set to English.
2.6 Caring for the AV 700 2.6 Caring for the AV 700
The ARCHOS ™ Video AV 700 is an electronic product that needs to be treated with more care than typical
consumer electronic products.
• Do not subject it to shock.
• Do not subject it to heat. Keep it ventilated by keeping it on its feet with the fold-out stand (especially when
connected to a computer).
• Keep the AV 700 away from water and excessively humid areas.