Lincoln Electric IM787 PRO-MIG 135 - Manual (Page 21)

C-1 ACCESSORIES C-1
OPTIONAL ACCESSORIES
1. K549-1 .035" (0.9 mm) Innershield ® Welding Kit
— Includes a contact tip, a gasless nozzle and a
.030/.035" .08mm-.09 mm) cable liner to permit the
Magnum™ 100L gun and cable to use .035" (0.9
mm) diameter flux-cored electrode. The fitting on
the end of the liner is stenciled with the maximum
rated wire size (.045"/1.2 mm). Also included is a
10 lb. (4.5 kg.) spool of .035" (0.9 mm) Innershield
NR-211-MP.
See “Innershield (FCAW) Conversion” in this sec-
tion for installation instructions and MAINTE-
NANCE section for proper feeding component con-
figuration and installation.
2. K664-2 Aluminum Feeding Kit — This kit is rec-
ommended for welding with .035 Aluminum wire.
This kit may also be used for feeding .035 stainless
wire. Included with this kit are a drive roll, liner and
contact tip.
It is important when changing
between welding with steel wire and aluminum
to exchange these components due to the
lubricant applied to steel wire. Failure to do so
may result in contaminated welds when weld-
ing aluminum.
3. K520 Utility Cart — Designed to transport the
Lincoln family of small welders. Has provisions for
mounting a single gas cylinder. Has front casters
and large rear wheels. Handle height is easily
adjustable. Bottom tray provided for tools and
accessories. Easy assembly required; takes less
than 15 minutes.
4 . K586-1 Deluxe Adjustable Gas Regulator &
Hose Kit
Accommodates CO2 or mixed Gas Cylinders.
Pro-MIG 135