Acer s60 - Manual (Page 110)

4 W o r k i n g w i t h y o u r s u p p l e m e n t a r y a p p l i c a t i o n s
Using Recorder
98
Storage media
In saving recorded audio or in playing audio files, Recorder provides two storage
media:
Audio recording function
You have two options to activate the Record function and start recording audio.
• Under the Multimedia category of Applications Launcher, tap the Recorder
icon , then on the Recorder main screen tap .
• Use the Multi-function button (set to Record function).
Refer to "Rear panel" on the Acer s50 and s60 Handhelds Quick Guide for the
location of the Multi-function button.
Before Recording mode is initialized, Recorder checks if the DSP (Digital Signal
Processing) chipset is available. If it is being used by another application, the warning
message below appears.
In the warning message box, you can either:
• Tap OK to terminate the application currently using the DSP. This will start
Recording mode, or
• Tap Cancel to continue with the original DSP task. The Recorder main screen
will be shown.
NOTE: This DSP-related error also occurs when Playback mode is activated while the DSP
chipset is occupied by another application.
Recording mode Playback mode
• Internal Recorded audio will be saved
in the handheld’s internal
memory in .pdb format Will play back .pdb files stored
in the handheld’s internal
memory
• Expansion Recorded audio will be saved
in the a Memory Stick in MP3
format Will play back MP3 files stored
in a Memory Stick