Avaya 3606 - Manual (Page 9)

Function Key Strokes
Issue 2 February 2003 5
Set the Ring Type
The wireless telephone has two ring settings: Normal Ring (an audible alert) and
Vibrator Ring (which only works if your wireless telephone has the optional
vibrator ringer).
To set the ring type:
1. Press the FCN key while the wireless telephone is on hook.
2. Press the # (right arrow) key.
3. Press 0 twice.
4. Press the # (right arrow) key to change the ring type. You can toggle from
Normal ring to Vibrator ring with the # key. An asterisk (*) indicates which
ring type is currently in use.
Adjust the high noise mode setting
The wireless telephone can be adjusted to account for background noise in your
environment. The factory default is “normal.”
To adjust the high noise mode:
1. Press the FCN key while the wireless telephone is on hook.
2. Press the # (right arrow) key twice.
3. Press 0.
4. Press the # (right arrow) key to change the ring type. You can toggle from
Normal to High to Severe. An asterisk (*) indicates which mode is currently
in use.
Function Key Strokes
Pressing the FCN key followed by a character (1-9 or 0) while off hook enables
you to access the feature options programmed for your Wireless Telephone. By
default, the first four feature options (FCN+1, FCN+2, FCN+3, and FCN+4) are
programmed automatically for your telephone. The following table shows these
default settings. The remaining feature options depend on how your Wireless
Telephone was programmed by your Avaya server administrator. You can view
these feature options by going off hook and pressing the FCN key repeatedly.