Lincoln Electric IM858 RED-D-ARC ZR-8 - Manual (Page 22)

C-1 ACCESSORIES C-1
ZR-8
OPTIONAL EQUIPMENT
(Field Installed)
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS -
For road, off-road and in-plant
and yard towing. (For highway use, consult applicable
federal, state and local laws regarding requirements
for brakes, lights, fenders, etc.)
Order
K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K889-2 & -3 Two-Wheel Undercarriage - For moving
by hand. Overall Width 29 in (.74m) Both have pneu-
matic tires. Puncture proof tires included with K889-3.
K1631-1 Puncture Proof Wheel Kit - For converting
K889-2 or K933-1 to puncture proof pneumatic tires.
K893-1 Caster for Undercarriage - Mounts to the
front of the K889-2 or 3 to allow easy movement on
smooth surfaces. Includes 6” diameter hard rubber
wheel and convenient toe-on, toe-off locking brake.
K933-1 Four Wheel Undercarriage - For Hand
Moving. Rear pneumatic tires, front molded wheels.
K934-1 Cylinder Brackets - For use with K933-1. For
transporting one welding gas cylinder.
K1737-1 FOUR WHEEL ALL-TERRAIN UNDER-
CARRIAGE -
For moving by hand at construction
sites. Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY) - For mov-
ing by hand on a smooth surface. One or two gas
cylinders can be mounted on the rear of the undercar-
riage with the installation of K1745-1 Cylinder
Holder(s). Heavy duty puncture resistant pneumatic
tires and front caster.
K1745-1 GAS CYLINDER HOLDER
Holds Welding Gas Cylinder for use on K1770-1
Undercarriage. One or two may be installed on an
undercarriage.
K1788-1 ROLL CAGE - Gives added damage protection.
Attaches to K1737-1, K1770-1, and K957-1.
K886-1 Canvas Cover -To protect the ZR-8 when not
in use. Made from attractive red canvas material
which is flame retardant, mildew resistant, and water
repellent.
K802-R Power Plug Kit- provides four 120V plugs
rated at 15 amps each and one dual voltage, Full
KVA plug rated at 120/240V, 50 amps.
K802-N Power Plug Kit - Provides four 120V plugs rated at 20
amps each and one dual voltage, full KVA plug rated at
120/240V, 50 amps.
K704 Accessory Kit - For Stick Welding. Includes 35 FT.
(10.7m) 2/0 electrode cable with lug, 30 Ft. (9.1m) 2/0 work
cable with lugs, headshield, filter plate, work clamp and elec-
trode holder. 400 Amp capacity.
K875 Accessory Kit - For Stick Welding. Includes 20 FT.
(6.1m) #6 electrode cable with lug, 15 Ft. (4.6m) #6 work cable
with lugs, headshield, filter plate, work clamp and electrode
holder and sample pack of mild steel electrodes. 150 Amp
capacity.
K894-1 Spark Arrester Kit - Includes a heavy gauge steel,
approved spark arrester and clamp for easy mounting to muffler
exhaust pipe.
K1690-1 GFCI RECEPTACLE KIT - Includes one UL
approved120V ground fault circuit interrupter duplex type recepta-
cle with cover and installation instructions. Replaces the factory
installed 120V duplex receptacle. Each receptacle of the GFCI
Duplex is rated at 20 Amps, the maximum total current from the
GFCI Duplex is limited to the 20 Amps. Two kits are required.
K1816-1 FULL KVA ADAPTER KIT - Plugs into the 120/240V
NEMA 14-50R receptacle on the case front (which accepts 4-
prong plugs) and converts it to a NEMA 6-50R receptacle,
(which accepts 3-prong plugs.)
T12153-9 Full-KVA Power Plug - One dual voltage plug rated at
120/240V, 50 amps.
K930-2 TIG Module - Provides high frequency and shielding
gas control for AC and DC GTAW (TIG) welding applications.
Its compact case is designed for easy carrying, complete with a
handle. High frequency bypass is built in
Requires K938-1 Contactor Kit, K936-4 Control Cable, and
K814 Arc Start Switch.
K938-1 Contactor Kit - For use with TIG Module, Provides a
“ cold” electrode until the triggering device (Arc Start Switch) is
pressed.
K936-4 Control Cable - Connects TIG Module to ZR-8.
K814 Arc Start Switch - Attaches to the TIG torch for convenient
finger control.
K937-45 Control Cable Extension - Allows TIG Module to be
operated at distances up to 200ft. from the power source.
Available in 45ft. (13.7m).