LT Security LTD451H6 - Manual (Page 10)

USER MANUAL
7
Chapter 4：DVR Boot up
4.1 System Initialization
After connecting the power adapter and turning on the power button, the system will
boot-up and start initializing.
4.2 Main Interface
Note: When HDD is not connected to DVR, CH-1 on main interface mode will show “H” and buzzer will sound
alarm. If you want to close the buzzer alarm, please enter into Device managementAlarm setting, and set “HDD
loss”, “HDD space” and “alarm output” to “off”
Chapter 5：DVR Menu
Pop-up Menu
After finishing system initialization, click right key of mouse on main interface
mode to enter into Pop-up Menu. Now you could proceed parameter setting and
control for Main Menu, Menu lock, Recording search, PZT control and recording
etc.
Note： 1. All the pictures shown as user manual are provided
only for your ref.
2. DVR is an abbreviation of the “Digital Video Recorder
Equipment”.
After finishing system initialization you are allowed to enter into
main interface. The picture4-2 is the main interface faulted by system,
which is under no video input status. Once there are any video inputs,
the interface will display live images accordingly for relative channels.
On main interface mode, when double-clicking live image of any
channel, the image will be maximized to full screen, then
double-clicking again, will be come back to quad display; when
clicking right key of mouse, allow you enter into Pop-up Menu; when
clicking left key of mouse, allow you select menu item; when clicking
any area outside menu, allow you exit the Pop-up menu.
Picture 4-1
Picture 5-1
Picture 4-2