LT Security LTD3446HT - Manual (Page 14)

>>Stand-alone DVR User Manual
13
9)
Progress Bar ： Press left and right key to increase and reduce the value.
10) Check box ： choose and press “OK” to confirm it.
11) Radio button ： Make a mutually exclusive choice in same list or group.
12) Soft keyboard：press “OK” button in edit box to pop-op soft keyboard.
3.2 Start-up
1) Start system：Insert 12V adapter output connector into DVR power port, set the power switch(on
back panel) on “ON” position, now the PWR indicator on front panel is light, when its color is green,
system is stand-by (default working status).Press the power key “ ” on
2) front panel or the power key “ ” on IR remoter, the power indicator will change into red, system
will turn into working status; When indicator is red, system will turn into working status after power
it.
3) Host NO. isn’t 0：If the host No. isn’t 0 and when you want to start the system in IR remoter, please
follow below way:
4) Press power key “ ” on the IR remoter till you heard “DIDI” two prompt sound，input the host No.
And then press “OK” . If the host No. is match, the system will start.
3.3 Exit system
1) Normal shutdown：When system is in working status, press the power key “ ” on front panel or
the power key “ ” on the IR remoter to pop-up system close dialog box, press “OK” button, the
system will turn into stand-by status.
2) Forced shutdown：Long time press the power key “ ” on front panel or the power key “ ” on
the IR remoter, system will be forced shutdown.
3.4 Status bar operation
When system running, exit the operation interface and main interface, the status bar will
display in the bottom left corner. It will show the system mute audio monitor and login status, also
include system info query/ alarm/backup and system clock, as below
Pic.11 Status Bar